ATA Cases

ATA Cases

Customizable Fabricated ATA Cases

The term ATA means the case meets the criteria set forth by the Airline Transport Association (Specification 300) for reusable shipping containers. The criteria stipulates the use of recessed hardware and requires the case to withstand the rigors of a minimum of 100 round trips on both surface and air carriers under normal conditions. We can make your custom ATA case to meet almost any requirement. These cases are highly customizable.

Case Styles

  • Hinged Pull Over Clamp (Handles on Perpendicular Sides)
  • Hinged or Clamp Lid (Handles on Perpendicular Sides)
  • Double Entry Rack with Mixer
  • Double Entry Rack or Shock Mount Rack

Wall Materials

  • ABS Laminated plywood:
    1/4″, 3/8″ or 1/2″ – all colors
  • Lightweight Coroplast:
    1/4″ only – all colors
  • Lightweight Pozi-Lite:
    1/2″ only – all colors

*Other special materials as specified by customers, i.e., carbon fiber, fiberglass, etc.

A.B.S. Exterior Options

  • Black
  • Red
  • Yellow
  • Green
  • Olive
  • Orange
  • Silver
  • White
  • Dark Blue
  • Light Blue
  • Gray
  • Wine
  • Brown
  • Purple

Fiberglass Exterior Options 

  • Black
  • Red
  • Orange
  • Silver
  • White
  • Dark Blue
  • Gray

Corners

Our corner angle is T6 Heavy-duty aluminum, riveted every three inches on both sides and is custom punched for each case, preventing un-riveted holes protruding from under corners.

A variety of styles & sizes of steel corners are available. Ball, Flat, Ball Stacking, Flat Stacking, and other various styles for special applications.

  • Large Ball
  • Large Flat
  • Large Sticking Ball
  • Corner Clamp **
  • Small Flat Stacking (Female)
  • Small Flat Stacking (Male)
**Clamps come in various sizes and are selected according to case size.

Latches

A variety of styles & sizes are available. Recessed, surface mount, valance spanning, slam latch, padlocking, key lockable, combination, draw-latch, etc.
  • Large Recessed Latch
  • Large Recessed Padlock Latch
  • Small Recessed Latch
  • Keyed Slam Latch
  • Slam Latch
  • Combination Lock Latch
  • Large Recessed Valance Latch
  • Small Recessed Latch
  • Large Recessed Valance Latch Keyed
  • Small Recessed
  • Large Recessed Latch
  • Large Recessed Padlock Latch
  • Small Recessed Latch
  • Keyed Slam Latch
  • Slam Latch
  • Combination Lock Latch
  • Large Recessed Valance Latch
  • Small Recessed Latch
  • Large Recessed Valance Latch Keyed
  • Small Recessed

Handles

Large and small recessed, surface mount, plastic, telescoping, etc.
  • Large Recessed
  • Small Recessed
  • Telescoping
  • Surface Mount
  • Plastic

Casters

Many various caster options are available. Weight requirements and case type determine which size and type of caster should be used.
  • 3.5″ Caster w/ Brake
  • 3.5″ Caster
  • 3.5″ Polyurethane
  • 4.5# Caster w/ Brake
  • 4.5″ Caster
  • 3.5″ Recessed Polyolesin
  • 3.5″ Recessed
  • 3.5″ Caster w/ Brake
  • 3.5″ Caster
  • 3.5″ Polyurethane
  • 4.5# Caster w/ Brake
  • 4.5″ Caster
  • 3.5″ Recessed Polyolesin
  • 3.5″ Recessed

Hinges

Continuous (piano type) hinge is our most commonly used and there are a variety of other hinge types for special applications.

Other Components

  • Caster Stacking Bench
  • Stacking Plates
  • Single Vent
  • Triple Vent
  • Rubber Feet
  • Plastic Feet
  • Shipping Plate
  • 3 Hole Vent
  • Caster Stacking Bench
  • Stacking Plates
  • Single Vent
  • Triple Vent
  • Rubber Feet
  • Plastic Feet
  • Shipping Plate
  • 3 Hole Vent